User's Manual

Integration Manual
BARTEC
Blatt 3/9
1.2 GUN
1) Drill 7 holes (1,0mm ) and 4 holes (5,5mm) with the
fixture in the lower housing.
Press 4 inserts into the big holes.
Lead the 7 wires (each with different colour) through the
drillings.
(LiY 0.08mm², d
iso
> 0.2mm)
2) Fill the RFID upper housing with Sikaflex as shown in
the picture.
3) Fix the RFID lower housing with 4 screws and 4
washers on the top housing.
4) Seal the screw heads and the wire openings with
Sikaflex.