User's Manual

Integration Manual
BARTEC
Blatt 6/9
2.3 UHF-Reader
1) Insert the UHF reader into the upper housing.
Solder appropriate wires on the UHF board as shown in
the picture and fix them with UV-glue.
Apply Sikaflex in the sealing area of the housing.
2) Put the RFID lower housing on the upper housing and
press them together.
3) Fill the resin into the RFID housing (without empty
space) and apply the opening of the lower housing with
Sikaflex
4) Lock the opening with the according cover.