Manualshelf

User manual

ManualsBrandsBARTHELME ManualsOptoelectronics & Displays66000033
6789101112131415
V 1.1 27.03.2012 13 / 15
CHROMOFLEX
®
Pro
3 Kanal / 4 Kanal
Fig. 7
Note maximum load: at 350mA 12 LEDs can be connected in series (having 3.5 Volts for green and blue, this
may result into a supply voltage of 46 Volts). At 700mA higher power dissipation is produced on the PCB. Max.
6 LEDs per channel can be connected in series. Otherwise electronics may break down or will be destroyed by
overheating.
7. Operation
Please operate this unit only, when it is working properly.
In case of an error, switch off the unit immediately. Do not operate the unit, until the unit was verified
electronically by a qualified electrician.
A case of error is:
- Visible signs of damage on the unit
- The unit is not operating properly
- fume rising or crackling sounds from the unit
-Visible signs of overheating
Maintenance and service which require access to live components inside the unit must be carried out by an
authorized electrician.
Warning: risk of electric shock!
How to avoid malfunctions or fire risk:
-Do not affect air circulation by covering the unit.
- Do not attach anything to the unit e.g. decoration items etc.
Do not let your children play unattended with electrical equipment. Children cannot always perceive possible
dangers correctly.
7.1 Start-up
Connect LEDs and power supply as shown in fig. 3, 4 and 6. Make sure that LED-stripes are connected to
CHROMOFLEX
®
Pro
CV or Power LEDs are connected to CHROMOFLEX
®
Pro CC and the correct power
supply was chosen. At first a test is performed on the module starting on red, changing softly through 8 colors,
holding 5 seconds each, color transition time is 2.5 seconds
Diagnostic LED: The modules are equipped with a small LED. For regular operation this LED will change every
5 seconds and flickers when data is transmitted over the bus.
Each module is shipped with several effects: Color changes, user programmes, random effects, editable color
tablets, fixed colors, etc. For more details please refer to the manual of the remote control and software for Pro
USB Dongle (for PC) at: www.barthelme.eu