Datasheet

_______________________________________________________________________
29/09/2006 1/6 FS3 series lenses for Seoul Semiconductor LEDs
FS3 SERIES LENSES
for SEOUL SEMICONDUCTOR Z-POWER P3
TM
LEDs
 High efficiency
 Available in 3 different beams
 50mm diameter sized for MR16
lamp applications
 Patent Pending
The FS3 series Low Profile Tri-lens module is
available for the Seoul Semiconductor LEDs : Z-
Power P3 ™.www.seoulsemiconductor.com
A software-optimized aspheric profile combined
with front shaped micro-lens arrays enable the
generation of three different lens models: narrow,
medium and wide beam.
The high collection efficiency reaches 85% of the
total flux emitted from the LED.
These lenses are assembled with a 50mm
diameter holder. The holder assures the proper
relative placement between the lens and the Z-
Power P3™ LEDs. Heat staking the three legs of
the holder to the customer’s PCB or heat sink
provides excellent optical and mechanical
assembly (see Fraen Application Note FAN01-EN,
at www.fraensrl.com).
Typical applications are:
• Reading lamps
• Internal fittings with MR16 standard
• Architectural Lighting
• Flash lights
• Most application where uniformity and high
intensity over a wide angle is required.
(1) Z-Power is a trademark of Seoul Semiconductor. For
technical specification on LEDs please refer to the Z-
Power datasheet or visit www.seoulsemiconductor.com
For ordering instructions, please contact
FRAEN CORPORATION FRAEN Srl
Scott M. Grzenda Dimitri De Gaetano
80 Newcrossing Road Via E. Fermi, 7
Reading MA 01867 20090 Settimo M (MI) – Italy
Phone: [phone] Phone: [phone]
Fax: [phone] Fax: [phone]
[e-mail] [e-mail]
To find a local distributor, check the Fraen website.
Website: www.fraensrl.com