Specifications

BARTINGTON INSTRUMENTS
Page 16 of 18 OM2443/2
With a sensor connected, all
output signals are faulty
Coupled incorrectly Check position of AC/DC
coupling switch
Balance mode set
incorrectly
Check position of balanced/
unbalanced mode switch
Defective sensor cable Check sensor cable using
relevant datasheet. Return
to Bartington Instruments if
found to be defective
Sensor defective Return PSU1 and sensor to
Bartington Instruments for
repair
PSU1 defective Return PSU1 and sensor to
Bartington Instruments for
repair
With a sensor connected,
one or two output signals
are faulty
Defective sensor cable Check sensor cable using
relevant datasheet. Return
to Bartington Instruments if
found to be defective
Sensor defective Return PSU1 and sensor to
Bartington Instruments for
repair
PSU1 defective Return PSU1 and sensor to
Bartington Instruments for
repair
If the solutions suggested above do not fix the fault, contact the Bartington Instruments
helpdesk.
11. Care and Maintenance
The PSU1 requires no routine maintenance. There are no user serviceable parts.
Caution: No attempt should be made by a user to repair the unit. Repairs by unauthorised
people may be dangerous and could affect the safety of users, damage the equipment, and
also invalidate the terms and conditions of the Warranty.