Specifications

BARTINGTON INSTRUMENTS

Page 7 of 18 OM2443/2

7. PSU1 Inputs, Outputs and Controls

7.1. Back Panel Connections and Controls

Key

1. X Signal Conditioned Output.

2. Y Signal Conditioned Output.

3. Z Signal Conditioned Output. The three BNC connectors carry the conditioned analogueue output voltages. The

conditioned outputs are the magnetometer X, Y and Z signals after they have been modified by the low/high pass filters

and, if a balanced output magnetometer is connected, converted to single-sided signals..

4. Space for unique serial number.

5. Magnetometer Socket. This multi-pin socket is for the connection of the magnetometer cable.

Note: Ensure correct orientation of the connector (indicated by the cut-out on the

connector body aligning with the notch in the socket).

1 2