Use and Care Manual

ASSEMBLY
3 4
Esmated Assembly Time: 20 Minutes
DO NOT over ghten hardware.
Step 1: Aach Base (A) to Fire Bowl (B) with Bolts (G) and Nuts (D). Tighten all bolts by
Allen Wrench (I). (View Fig 1).
STEP 2: Aach Frame Support Parts (C) to Legs (B) by Bolts (H) as shown. Repeat the same
steps for another Frame Support Parts. Tighten all bolts by Allen Wrench (J)
STEP 3: Place Fire Bowl (E) in the center of Top Frame (A) and put Log Grate (D) in the Fire
bowl (E).Mount Lid Ring (G) on the Mesh Lid (F), then place the assembled Mesh Lid over
the Fire bowl (E).