Energy Guide

MAINTENANCE MAINTENANCE
12
CLEANING THE FILTER:
To clean the coarse lter and the ne lter, use a cleaning brush. Reassemble the lter parts as shown
in the gures in the last page and reinsert the enre assembly in the dishwasher, posioning in its seat
and pressing downward.
CLEANING THE DISHWASHER:
To clean the edge around the door, you should use only a so
warm, damp cloth. To avoid penetraon of water into the door
lock and electrical components, do not use a spray cleaner of
any kind.
The spray arms can be easily removed for periodic cleaning of the nozzles, to prevent possible clogging.
Wash them under running water and carefully replace them in their seats, checking that their rotary
movement is in no way impeded. Grasp the middle of the spray arm, pull it upwards to remove it.
Wash the arms under a jet of running water and return them carefully to their seat. Aer reassembly,
check that the spray arms turn freely. Otherwise, check that they have been installed correctly.
CLEANING THE SPRAY ARMS:
Aer every wash, turn o the water supply and
leave the door slightly open so that moisture
and odors are not trapped inside.
Before cleaning or performing Maintenance,
always remove the plug from the socket.
To clean the exterior and rubber parts of the
dishwasher, do not use solvents or abrasive
cleaning products. Only use a cloth with warm
soapy water. To remove spots or stains from the
surface of the interior, use a cloth dampened
with water with a lile vinegar, or a cleaning
product made specically for dishwashers.
It is recommend that you run a wash cycle with
the dishwasher empty and then remove the
plug from the socket, turn o the water supply
and leave the door of the appliance slightly
open. This will help the door seals to last longer
and prevent odours from forming within the
appliance.
If the appliance must be moved, try to
keep it in the vercal posion. If absolutely
necessary, it can be posioned on its back.
One of the factors that cause odors to form
in the dishwasher is food that remains
trapped in the seals. Periodic cleaning
with a damp sponge will prevent this from
occurring.