Manualshelf

Use and Care Manual

ManualsBrandsBarton ManualsAir Conditioners14,000 BTU 4-in-1 Portable Air Conditioner with Heater, Dehumidifier and Remote Control in White
12345678910
INSTALLATION AND ADJUSTMENT
1. Put front end of exhaust hose assembly onto jugged position of exhaust air outlet at back panel, fasteners
will lock the exhaust hose assembly. See illustration.
2. Keep the right direction of slant side of adapter, for ease installation of window seal-plate. Make sure to
keep the exhaust hose connected in good position.
3. Make the window half open, put the seal-plate into window, either in vertical or horizontal position. See
illustration.
4. Extend seal plate parts and adjust it to the length of window, keep both ends to meet window edge, x it
with screws.
5. Keep two ends of window seal-plate to meet the window edges well, to assure seal effect. Tighten screws.
6. Move the unit with the exhaust hose assembly installed in front of window and keep the unit at least 50cm
away from the walls or other objects.
7. Install the rectangle end of exhaust hose assembly into the corresponding rectangle hole in window seal-
plate assembly, x it with screw and close the window.
9