Use and Care Manual

ADJUSTMENT AND MAINTENANCE
INSTALLATION OF THE FILTER:
Be sure to install the lter to side panel then for the lter to back panel.
Install the lter with opposite direction of removal.
Install the lter into place gently to avoid any damage to lter.
END OF SEASON STORAGE:
1. Screw off the drain cover and pull out the stopper to drain condensate water completely. (Note: the tilt
angle of the unit must be <=30).
2. Keep the unit running in fan mode for half day to dry inside of unit completely to prevent from going
moldy.
3. Turn off the unit, pull out plug then wrap the power cord around the wire-winding pillar, insert the plug into
the universal xing hole at the back panel of the unit, install the water stopper and drain cover.
4. Remove the heat exhaust hose assembly, clean and keep it properly. Hold the exhaust hose assembly
with both hands when removal. Push the fasteners aside on exhaust air outlet using your thumbs, then pull
out exhaust hose assembly.
5. Pack the air-conditioner properly with soft plastic bag and put it in dry place with appropriate dust-proof
measures, and keep the unit away from children.
6. Take out the batteries from the remote control and keep it properly. Ensure the unit is stored in a dry
place. All accessories of the unit shall be protected together properly.
SPECIFICATIONS
13
FUSE PARAMETER
TYPE: FSD or 50F
VOLTAGE: 250V
CURRENT: 3.15A