Operation Manual

EN
page 32
2.2.2 Operation
• Inserttheracklledwithdishestowash.Theplatesmustbecorrectlyplacedintherack
(seepict.3).
Close the door.
• Selectthewantedwashingcycle(1,2,3,∞)bypushingthebutton"H"(seepict.1).The
display will show in sequence all available programs.
Once the wanted program is displayed, do release the button.
 ThegreenLED"B"oftheselectedcyclelightsup(1,2,3,∞).
• Startthecyclebypushingthebutton"H"fornotmorethan1sec(seepict.1).Starting
ofthecycleissignalledbytheindicatoroftheselectedcycleashing.Attheendofthe
cycletheindicatorstopsashingandthemessage"END" appears on the display.
• Themachineisreadyforanewwash.
Itisadvisabletochangethetankwater,bymeansofanotherlling,atleastevery40-50
washes or twice a day.
N.B.:themachinedoesnotacceptothercyclesuntilthedoorisopenedorthebutton"H"
ispressedtwice(seepict.1).
Thecycles(1,2,3,∞)arefactory-setwithtimesof60-120-180-300seconds.
2.2.3 Switching OFF
• Turnthebutton"J". The machine will turn in "STAND-BY"mode(theredLED"E" comes
ON).
• Draincompletelythewash-tank.Takeofftheoverowpipe.Formachinesequippedwith
drain pump see chap. 2.5.
• SwitchthemainpowerswitchOFF.
• Shutthewatervalve.
• Attheendoftheday,cleanthemachine(seechap.5"Maintenance").
pict. 3
2
3
1