Operation Manual

page 25

1.9 Programming

Someparametersareadjustableupondifferentapplicationneeds.

To set the parameters you enter by a “key” into the "SERVICEMAN MENU".

MachineON.

To enter the "SERVICEMAN MENU" keep pressed for a few seconds (5") both the "H" and

"J" keys, after gently pressing the "J" key. The displays will show "Key".

By the "K" (decrease) and "L" (increase) key, select the key "15".

Conrmtheselectionbypressingthe"H" key.

If the password is correct the parameter choice will be accessed; otherwise the message "Err"

will be displayed for about 4 seconds.

If you try to enter programming during washing, the message "no Pr" will be displayed and

the machine will continue the cycle.

The machine will automatically exit programming if no key is pressed for about 20 seconds.

1.9.1 Parameter choice

On entering parameter choice the message "P" will be displayed; press the key "H" repe-

atedlytodenetheparameternumber"P1", "P2",... "P6".

At this point it will be possible to:

selectthenumberoftheparametertobemodiedbypressingthekeys"K" (decrease)

and "L" (increase).

Conrmtheselectionbypressingthe"H" key.

To exit the programming menu press the "J" key.