Operation Manual

USE AND MAINTENANCE MANUAL

Pag. 15

REMARK: Do not wash the equipment with direct jet or at

another pressure because eventual infiltrations to the electric

components may harm the regular working of the equipment or

of the single safety systems, and penalty for this would be the

loss of guarantee.

CHAP.5 MAINTENANCE

5.1 GENERAL RULES

The machine are designed to reduce maintenance requirements. It is

necessary to observe the following rules to make the machine last

long, and work without problems.

In any case, it is necessary to observe the following rules to make the

machine stay in perfect working order:

• keep the machine clean and in good condition

• avoid making temporary or urgent repairs frequently

It is very important to observe the maintenance directions; check all

the different parts of the machine periodically, so that no anomaly can

occur, thus anticipating the time and equipment needed for any

maintenance work.

Before cleaning turn off the power.

5.2 PERIODIC MAINTENANCE (TO BE DONE AT LEAST EVERY 20 DAYS)

To make operations following easier, the rack-holder frame can be

removed from its seat.

• Remove the upper and lower rinse arms, by unscrewing the

fastening.

• Unscrew and clean all the sprayers and put them back in their

place.

• Remove the upper and lower wash-arms by unscrewing the rinse

pin , clean and rinse them.

• Remove the wash pump filter, clean it and rinse it.

• Thoroughly clean the wash tank.

• Leave the appliance lid open for the whole resting period.