Operation Manual

USE AND MAINTENANCE MANUAL

Pag. 3

CHAP.1 INTRODUCTION

The warnings contained in this manual provide important

information for safely installing, using and servicing this

machine.

The operator is required to read this manual before starting

any operation involving handling, installation, use,

maintenance or disassembly of the machine. This manual

must be kept intact and in a safe place for frequent

consultation.

CHAP.2 INSTALLATION

2.1 HANDLING AND UNPACKING

• Move the machine very carefully using a forklift.

• Make sure the equipment is not damaged, if it is immediately

inform the dealer and shipper. If in doubt do not use the

machine until it has been checked by professionally trained

personnel.

• Move the machine to the site where it will be used and

remove the packing.

Packing materials (plastic bags, polystyrene,

nails) can be dangerous and must be kept out of

the reach of children.

• The installation must be carried out according to the

manufacturer’s instructions and by professionally trained

personnel.

• Only a fixed connection is suitable for this equipment.

• Position the machine and level it perfectly using the feet.

• The flooring must be suitable for the overall weight of the

machine.

• Follow the indications on the installation drawing and set-up

the electrical, water and drain systems in the wash area.