Product Info

Configuration through WEB interface– 14
Common settings
Master card: Master card number.
Use master code: Enable/disable using master code to open the lock.
Master code: The code entered on the keypad for opening the lock.
Locks management
Lock open time (s): Time for which the panel relay contacts are closed or open.
Lock open delay: Time after which the contacts of the panel's relay will close or open.
When using the control module with two locks SH-42, when entering the master code
on the panel, both locks will open.
Registering access cards via web interface
Enter 0 in the “Master card” field and click the “Apply” button.
Next, bring the master card, necessary for the registration, to the panel reader area -
the signal "BEEP" will sound, which means that the master card has been successfully
registered. After that, you need to put this card again to enter the card-issuing mode.
After that, in the area of the panel reader hold the user cards in turn. After each user
card, the “BEEP” signal will sound, which means the successful registration of the raised
card.
The time between adding cards should not exceed 10 seconds.