Installation Guide

Page 11
Installaon
Cered 09/02/2015
QCI0288 Rev 2
DOOR GLASS
To mount the Door Glass (F), loosen the Door Clamp Screws (EE) on both the Top
Hinge (E) and Boom Hinge (J).
Next, clean the area the Door Glass (F) contacts the hinges with rubbing alcohol.
Carefully slide the Door Glass (F) into the open hinge slots and ghten the Door
Clamp Screws (EE).
If the Door Glass (F) will not t into the hinges, slightly loosen the Panel Clamp
Screws (CC) on the top hinge to adjust the hinge posion to t the Door Glass (F). Be
sure to reghten Panel Clamp Screws (CC) aer door installaon if they were loos-
ened.
Slowly close the Door Glass (F), adjusng as required to get a 3/16” gap at the wall.
Be sure the Door Clamp Screws (EE) are securely ghtened when adjusng is com-
plete.
7
QCI5288 Rev. 0 Page 11 of 15 Date Certified: 06/21/2016