FRAMELESS SLIDING DOOR FOR TUB OR SHOWER INSTALLATION INSTRUCTIONS QCI5019 Rev 0 Page 1 Certified 06/21/2016
Two primary materials are used to manufacture your new enclosure: tempered glass and anodized aluminum. To assure a long lasting finish on the enclosure, wipe it down with a towel after each use. Never use a scouring agent to clean the aluminum. Lysol To install your bath enclosure, you will need the following: Although safety tempered glass is very resistant to breakage, the glass can still break if unequal pressure is placed on it during installation. Use caution.
S. 1 Nylon Bottom Guide T. 2 #6 x 3/8” Pan Head Screws U. 4 Stainless Steel Bumper Inserts J.
3/16” 3/16” ) QCI5019 Rev 0 Page 4 Certified 12/13/06 Certified 06/21/2016
QCI5019 Rev 0 Page 5 Certified 06/21/2016
QCI5019 Rev 0 Page 6 Certified 06/21/2016
QCI5019 Rev 0 Page 7 Certified 06/21/2016
QCI5019 Rev 0 Page 8 Certified 06/21/2016
