Installation Sheet

QCI5298 REV. 0 Page 19 Cered 10/1/17

Place the Drip Vinyl onto the bottom of the door

panel. Line it up on the hinge side of the door

and cut it off flush with beginning of the Strike

Jamb.

Once adjusted to fit, run a small bead of silicone be-

tween the drip vinyl and the glass to secure the vinyl

sweep and prevent water from collecting inside the

sweep if adjusted.

Inside the shower, carefully run a continuous bead of silicone between the wall an SC508

Wall Jamb [4] on the strike side. Apply another bead of silicone around where the jambs

meet the threshold.

It is optional to also run a bead between the wall jamb and the wall on the outside of the shower.