Installation Sheet
QCI5298 REV. 0 Page 20 Cered 10/1/17
Inside the shower, carefully run a continuous bead of silicone where SC982 Wall Jamb [2]
and SC983 Hinge Jamb [3] meet. Apply another continuous bead of silicone where the jamb
and wall meet. Apply a final bead where the jambs and threshold meet.
It is option to also run a bead between the jamb and wall on the outside of the shower.
29
DO NOT use the shower before the silicone has cured!
Follow the manufacturers’ recommendation for cure time (usually 24-
48 hours) before using the shower.