Installation Guide
QCI5150 Rev 0 Page 13 Cered 6/6/2016
16 Reinstall the Anti-jumper on the Clamp [8] which was removed from the Clamp in step 10.
17 Install the Vinyl Seal [6] or the Bumpers [14/15]
Vinyl Seal: Cut the Vinyl to size equal to the Door Panel height minus 1/2”. Place the Vinyl onto the
wall side of the door panel with the lip facing inside the shower.
Bumpers: Locate the self adhesive bumpers 1/2” from the top and bottom edges of the door panel
where it meets the wall. Thoroughly clean with alcohol swabs and dry the wall. Stick the bumpers to
the wall in cleaned locations.