Installation Guide

QCI0286 12 XX/XX/XXXX
14 Disassemble the Pull Handle [14] and install on the Door Panel [2] . Handle should face out-
side of shower and the knob on the back side of the Pull Handle [14] should be on the bottom side
as shown.
RODA Decal
U-channel Filler
15 Cut Filler [5] to appropriate length to cover the remaining gap between the Panel Glass [1]
and the wall. Snap Filler [5] over open top of the Horizontal U-channel [4] and place RODA Logo
Decal in the top corner of the Vertical U-channel [3] .