Installation Guide
QCI0286 13 XX/XX/XXXX
16 Place large Vinyl Seal [15] on Door Panel [2] so that the vinyl edge sticks out
towards the Fixed Glass Panel [1]. Then place smaller 3/8” Vinyl Seal [6] on the handle
side of the Door Panel [2] so that the vinyl edge sticks out towards the inside of the
shower. (See Example) Use silicone to hold in place.
Large Vinyl Seal
3/8” Vinyl Seal
17 The larger vinyl seal will need to be cut slightly in order for the header bar to have
space to roll freely. See example below.
Large Vinyl Seal