Spec Sheet
Watching Out for You!
www.basementwatchdog.comwww.basementwatchdog.com
Features and Benets
Basement Watchdog Sump Pump Run Times
Manufactured by Glentronics, Inc., Lincolnshire, IL 60069 800-991-0466
Preparing the Basement
Watchdog Standby Battery
Emergency
Standby Battery
• Designed to be discharged and recharged for use
with battery backup sump pump systems, marine or
RV applications
•
Lasts longer and performs better than automotive or
deep cycle batteries
• Provides days of intermittent backup protection
• Accommodates the uid sensor designed for
Basement Watchdog batteries. Fluid sensor is not
compatible with other brands of batteries.
• 1-year free replacement warranty
The Basement Watchdog Emergency battery is
shipped dry and vacuum sealed to retain freshness.
Unlike other batteries, the Emergency battery will
have 100% life when you are ready to install it.
Activating the battery is done by simply adding
the 6 qt. battery uid pack (sold separately).
Instructions are provided inside the carton. An
electronic version and an instructional video are
available online at www.BasementWatchdog.com.
The uid is added, it will reach 85% charge within 15
minutes. The remaining charge is put in by the
Basement Watchdog backup sump pump system.
Basement Watchdog batteries are the only batteries
that will accommodate the uid sensor allowing the
backup
pump controller to sound an alarm when
distilled water is needed.
Compatibility
Battery Model #
BW-27AGM
30HDC140S
24EP6
BWD12-120C
40 Hours*
50 Hours*
Not Recommended
BWSP and BW4000
48 Hours*
60 Hours*
Not Recommended
BWE and DFK961
80 Hours*
100 Hours*
50 Hours*
* Based on 10% duty cycle. Run times may vary based on inow of water
The Basement Watchdog Emergency Standby Battery is
compatible with the following systems:
• Basement Watchdog Emergency (BWE)
• Basement Watchdog Combo (DFK961)