Instructions / Assembly

Base Products Corporation www.basepump.com 800 554 1426 page

Models: RB750 HB1000 CB1500 Copyright by Base Products Corporation 2017 Rev. May/2017

Basepump Ejector Kit Float Kit

1. Ejector Main Control Valve

2. PVC Check Valve

3. PVC Exit Unit with Internal Diffuser Disk

4. (2) Clip-on Hangers

5. Polypro Male Adapter

1. Float Assembly

2. 15 Feet of Transfer Tubing

3. (4) Hook ’n Loop Straps

Parts Kit Water Alarm Kit

1. (3) Wood Screws

2. Clip-on Hanger for Suction Pipe

3. Suction Screen with PVC Adapter

4. (2) Hose Clamps (1) for the alarm, (1) for the float

3 Feet of Discharge Hose (not shown here)

1. Alarm & Battery

2. Mounting Bracket & Screw

3. Cable Tie & Mounting Pad

4. Note: Sensor Float is inside battery

compartment

Note: CB1500 includes a commercial water

alarm that is different from this photo.