User manual
• Never use the product immediately after it has been brought from a cold room
into a warm one. The condensation generated could destroy the product. Allow
the device to reach room temperature before connecting and using it. This may
take several hours.
• Do not put any objects on the product and never cover it.
• Never pour liquids over electric devices and never place liquid-lled objects near
the device.
• Consult an expert when in doubt about operation, safety or connection of the
device.
• Maintenance, modications and repairs are to be performed exclusively by an
expert or at a qualied shop.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
Operation
When choosing a cable, please note that there are different types of HDMI cables.
In case of doubt, consult a professional for further information.
The product supports HDCP encryption and CEC.
• Make sure all devices to be connected are switched off.
• Connect the permanently installed HDMI output cable to a TV/projector.
• Connect up to 3 playback devices (e.g. Blu-ray player, hard drive recorder, game console) to
the HDMI inputs INPUT 1/2/3.
• Turn on all connected devices.
• Press the SELECT button to select the desired playback device. The LED indicator of the
selected input channel lights up blue.
Cleaning and care
• Each time before cleaning, disconnect the product from all connected devices.
• Under no circumstances use aggressive cleanings agents, cleaning alcohol or other chemical
solutions since these can penetrate the housing or impair functionality.
• There are no components located inside the product you need to maintain. Never open/
dismantle the product.
• Clean the product with a dry, bre-free cloth.
• You can easily remove dust using a long-haired, soft and clean brush.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product in accordance
with applicable regulatory guidelines.
You thus fulll your statutory obligations and contribute to the protection of the
environment.
Technical data
Input.............................................. 3x HDMI
Output ........................................... 1x HDMI
Supported resolutions ................... 480i/576i/480p/576p/720p/1080i/1080p/2160p
Colour depth ................................. 12 bit
Video bandwidth ........................... 340 MHz / 10.2 Gbps
Video input signal ......................... 0.5 – 1.0 V p-p
DDC input signal ........................... 5 V p-p (TTL)
Gold-plating of contacts ................ 24K
Operating conditions ..................... 0 to +40 °C, 10 – 85 % RH (non-condensing)
Storage conditions ........................ -10 to +85 °C, 5 – 90 % RH (non-condensing)
Dimensions (W x H x D) ............... 82 x 17 x 76 mm
Weight .......................................... 88 g
Operating instructions
3-Port HDMI switch
Item no. 1490513
Intended use
The product features 3 HDMI inputs and one HDMI output. Select the input signal by pressing
a button on the product. External power supply is not required.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged.
In addition, improper use can cause hazards such as short circuiting, re, electric shock etc.
Read the instructions carefully and keep them. Make this product available to third parties only
together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
HDMI is a registered trademark of HDMI Licensing L.L.C.
Delivery content
• HDMI switch
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions from our website www.conrad.com/downloads or
scan the printed QR code. Follow the instructions on the website.
Description of symbols
The symbol with a ash in a triangle indicates health risks e.g. due to electric shock.
The symbol with an exclamation mark in a triangle indicates important instructions
contained in these operating instructions that must be followed.
The arrow symbol alerts the user to the presence of important tips and notes on
using the device.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, ammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
• When setting up the product, make sure that the cables are not pinched, kinked
or damaged by sharp edges.
• Always lay the cables so that nobody can trip over or become entangled in them.
This poses a risk of injury.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represents the technical status at the time of printing.
Copyright 2017 by Conrad Electronic SE. *1490513_V2_0817_02_IPL_m_en