Instructions

Basetech VACUUM VISE
IntendedUse
Theproductisintendedforclampingsmallworkpiecestoallowthemtohavefurtherworkperformed
uponthem.Otherusesorchangestotheproductareconsideredtobecontrarytotheintendeduse and
mayharbourrisksofinjuryanddamage.Themanufacturerdoesnotacceptanyliabilityfor
injuryor
damageresultingfromuseofthisproductcontrarytoitsintendeduse.Theproductisnotintendedto
beusedforcommercialpurposes.

SafetyAdvice
 KEEPALLTHESAFETYADVICEANDINSTRUCTIONSINASAFEPLACEFORFUTUREREFERENCE!
 CAUTION!DANGEROFINJURY!Whenworkingwithhand‐heldelectricalpowertoolsyoucanbe
seriouslyinjurediftheclamped workpieceslipsorbecomesloose.Neverworkonaclamped
workpieceusinghand‐heldelectrical
powertools.
 Checktheproductbeforeeachuseforanydamage.Donotusetheproductifyoudiscoveritis
damagedinanyway
 Checkallthreadedconnectionsontheproductforproperseatingbeforeeachuse.
 Checkregularlytheleversuctionpadforproperseating
andretightenifnecessary
 Attachthevicetoasmooth,stable,flat,undamagedsurface,freeofdustandgrease
 Theviceisanaluminiuminjectioncastingandthereforeisonlyimpactresistanttolimited
extent.
 Donotuseextensiontubesonthetommybars.Thereisthedanger
ofoverloading(fracturing)
thespindle.
 Wearsafetyglovesandglasses.

Howtouse
Placethevacuumbasevicedownontoasuitableflat,smoothsurface.
Turnthesuctionpadleveranticlockwiseasfarasitwillgotofixthesuctionpadinplace.
If you fix the suction foot in place directly at the edge of the bench, you will be
 able to clamp long
workpiecesverticallytoworkon theirends.
Turnthesuctionpadleverclockwisetoreleasethesuctionpad.
Turntheviceintothedesiredpositionandfixtheballjointinpositionwiththeballjointtommybar.