Certifications 2

ManualsBrandsBASETECH ManualsSoldering StationsSoldering kit analogue 48 W ZD-99 +150 up to +450 °C + desoldering pump, + solder

Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau

Item no.: 588251

Material Safety Data Sheet

Page 1 of 7

1. Product & Company Identification

Product: Solder wire

Manufacturer: Conrad Electronic SE

Address: Klaus-Conrad-Str. 1, D-92240 Hirschau

Telephone: +49 (0) 9604 / 40 - 8988

Date of issue: 07.04.2016

2. Hazards Identification

EMERGENCY OVERVIEW

This product consists of silver grey metal wire which contains core of rosin. There is no immediate health hazard associated

with the wire product and it is not reactive under normal circumstances of use. Though the wire is not flammable, if involved in

a fire and exposed to extremely high temperatures, harmful fumes of metal oxides may be generated.

During soldering operations, the most significant routes of exposure are inhalation, and contact of the skin and eyes. Molten

solder can cause thermal burns. Prolonged or repeated exposure to tin fumes can result in benign pneumoconiosis, which

causes inflammation of the lungs, but there is no distinct fibrosis or evidence of disability.

POTENTIAL HEALTH EFFECTS INFORMATION

Inhalation:

The fumes generated during soldering operations may cause respiratory irritation.

Ingestion:

Ingestion is not expected to occur in normal use.

Eye Contact:

Contact with the wire form of this product can be physically damaging to the eye. Contact with the molten core solder will

cause burn to the eyes. Fumes generated during soldering operations can be irritating to the eyes.

Skin Contact:

Contact of the wire form of this product with skin is not anticipated to be irritating. Contact with the molten core solder will burn

contaminated skin. Fumes generated during soldering operations can be irritating to the skin.

3. Composition/Information on Ingredients

Type: Admixture

Chemical Name In% by weight CAS No. EC No. Molecular Formula

Tin 97.314 7440-31-5 231-141-8 Sn

Copper 0.686 7440-50-8 231-159-6 Cu

Rosin 2 8050-9-7 232-475-7 C19H29COOH

Abbreviation: CAS: Chemical Abstract Service

EC: European Inventory of Existing Commercial chemical Substances

Summary of content (7 pages)

PAGE 1
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 588251 Material Safety Data Sheet 1. Product & Company Identification Product: Solder wire Manufacturer: Conrad Electronic SE Address: Klaus-Conrad-Str. 1, D-92240 Hirschau Telephone: +49 (0) 9604 / 40 - 8988 Date of issue: 07.04.2016 2. Hazards Identification EMERGENCY OVERVIEW This product consists of silver grey metal wire which contains core of rosin.
PAGE 2
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 588251 Material Safety Data Sheet 4. First Aid Measures Inhalation If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Seek immediate medical attention. Ingestion Give water to drink. Induce vomiting only to a conscious, non-convulsing individual. Never give anything by mouth to an unconscious person. Seek immediate medical attention.
PAGE 3
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 588251 Material Safety Data Sheet 6. Accidental Release Measures Procedures for Cleanup: Material is recyclable. Control source of spillage if possible to do so safely. Clean up spilled material immediately, observing precautions in Section 8, Personal Protection. Molten metal should be allowed to solidify before cleanup. Once solidified, wear gloves, pick up and return to process.
PAGE 4
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 588251 Material Safety Data Sheet 8. Exposure Controls / Personal Protection Control Parameters Exposure Standards (Safe Work Australia) Tin (metal): TWA: - ppm / 2 mg/m³ STEL: - ppm / - mg/m³ Tin, organic compounds (as Sn): TWA: - ppm / 0.1 mg/m³ STEL: - ppm / 0.2 mg/m³ Copper (fume): TWA: - ppm / 0.
PAGE 5
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 588251 Material Safety Data Sheet 9. Physical And Chemical Properties Appearance: Solid –silver grey metal.
PAGE 6
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 588251 Material Safety Data Sheet 11. Toxicological Information General: The major route of exposure is inhalation of fumes generated from high temperature processing. Dust generated by handling and processing also creates an inhalation and/or ingestion risk. Toxicity: Tin: Acute, short term exposure to tin fumes can cause irritation of the eyes, skin, mucous membranes and respiratory system.
PAGE 7
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 588251 Material Safety Data Sheet 12. Ecological Information This product, a metal alloy, is relatively insoluble (and therefore not readily bioavailable); however, processing of the product or extended exposure in aquatic and terrestrial environments may lead to the release of tin and copper compounds in more bioavailable forms. 13.