User manual

8. Operating Elements

1 Fan

2 Mains socket for connecting the charger to the mains voltage

3 Direct voltage input (11 - 18 V/DC, stabilised), e.g. to connect to an external vehicle lead battery

4 Socket for external temperature sensor (not enclosed, can be ordered separately)

5 MicroUSB socket (only for rmware upgrade by manufacturer)

6 Lighted LC display

7 "STOP" button: Selecting the rechargeable battery programme in the main menu, return from a submenu, stop-

ping charging, cancelling

8 "–" button: Selecting the rechargeable battery programme in the main menu, value input (value reduction), menu

selection (back), display of various data during charging/discharging

9 "+" button: Entering values (increasing value), menu selection (forward), displaying the voltage values of the

individual cells when charging lithium batteries with a balancer connection

10 "START" button: Starting/continuing charging, conrmation of a setting/operating function

11 Round sockets (4 mm) for rechargeable battery connection (red = plus/+, black = minus/-)

12 Balancer port for connecting the enclosed balancer boards

Either operate the charger via the mains voltage connection (2) or the direct voltage input (3). Never use

both inputs at the same time. This may damage the charger.