User manual
17
c) General Information on Operation of the Menus
• Select the desired submenu from the main menu using the "STOP" or the "–" button as described and conrm your
selection with the button "START".
• In a submenu, you can call the different settings with the buttons "+" and "–".
• To modify a value, push the "START" button - the display then ashes. Modify the value ashing in the display us-
ing the "+" and "–" buttons. For quick adjustment of a value (e.g. the charging current), keep the respective button
pushed for a longer time.
• Save the (modied) value with the "START" button.
• Exit each setting menu using the "STOP" button. The charger then returns to the main menu.
Various information is indicated on the display during a charge/discharge process by repeatedly pressing
the button "–". If you do not push any button for a few seconds, the charger will return to the normal display.
If a Lithium rechargeable battery with balancer plug is connected to the charger, you can push the button
"+" while charging/discharging to switch to the voltage display for the individual cells (for 5- or 6-cell re-
chargeable batteries, push the button again to switch between the displays for cells 1/2/3/4 and 5/6). Briey
push the "START" button so that the charger will return to the normal display (you can also wait for a few
seconds without pushing any button).