User manual
33
14. Saving/Loading Rechargeable Battery Data
The charger has 10 memory slots in which you can store often-used settings. For example, the data (cell number,
charging procedures, charging current) for 3 different LiPo ight batteries can be saved there, so that you do not have
to set them anew every time.
a) Saving Battery Data
• Select the function "Memory Save" in the main menu of the charger with the
button "STOP" or "–".
• Conrm the selection by pressing the "START" button. The memory number
ashes.
• Select one of the 10 memories (01....10) with the button "+" or "–".
When the memory is empty, "NULL" is displayed.
If there already are data in the memory, the display will alternate,
e.g., the rechargeable battery type, rechargeable battery program,
cell number, as well as the charging and discharging current.
• Briey push the "START" button to start setting mode. The rechargeable
battery type is displayed rst; see example in the gure on the right.
Briey pushing the "STOP" button will take you one step back or out
of the setting mode.
• Select the rechargeable battery type (LiPo, LiIon, LiFe, LiHv, NiMH, NiCd, Pb) with the "+" or "–" button, then briey
push the "START" button.
The following display depends on the rechargeable battery type. A LiPo
rechargeable battery has been selected in the rst step in the gure on the
right (see above).
• Briey push the "START" button to switch between the respective available
setting options. The respectively adjustable value ashes.
• Modify the value ashing using the "+" and "–" buttons. Keep the respective button pressed for quick adjustment.
• To save the settings, keep the button "START" pressed for 3 seconds. The
display now shows the data of the memory and the memory slot number
ashes.
• The "+" or "–" button selects another memory slot to programme it or change an existing programming.
Briey pushing the "STOP" button leaves the setting mode. The charger is in the main menu again.
PROGRAM SELECT
Memory Save
MEMORY [01]
NULL
MEMORY LiPo [01]
BAL 3S 1.0A
BATT MEMORY SAVE
LiPo Battery
LiPo BAL-CHG 3S
C= 3000mAh 3.0A
MEMORY LiPo [01]
BAL 3S 1.0A