User manual

Max. cell voltage when charging

The maximum cell voltage can be set depending on the set rechargeable bat-

tery type (LiPo, LiIon, LiFe, LiHv and Pb).

The charger ends charging when all cells have reached the set voltage.

LiPo: 3.80 - 4.20 V/cell (basic setting 4.20 V)

LiIon: 3.80 - 4.10 V/cell (basic setting 4.10 V)

LiFe: 3.30 - 3.65 V/cell (basic setting 3.60 V)

LiHv: 4.00 - 4.40 V/cell (basic setting 4.35 V)

Pb: 2.10 - 2.50 V/cell (basic setting 2.40 V)

Loading factory settings (reset)

This recovers the factory settings (reset).

Keep the button "START" pressed for more than 2 seconds.

Then the charger starts again and will then be in the main menu again.

Observe that all values set by you are then reset to factory settings; the 10 rechargeable battery memories

(see chapter 14) are also deleted.

Battery end volt

LiPo 4.20V/C

Battery end volt

LiIo 4.10V/C

Battery end volt

LiFe 3.60V/C

Battery end volt

LiHV 4.35V/C

Battery end volt

Pb 2.40V/P

FACTORY RESET

PRESS ENTER >2S