User manual

44
20. Information on the Charger
Various information is indicated on the display during a charge/discharge process by repeatedly pressing the button
"–". If you do not push any button for a few seconds, the charger will return to the normal display.
The information that can be displayed depends on the connected rechargeable battery type.
Voltage of the battery at the end of charging/discharging
Battery capacity for safety cut-off
Duration for safety timer
Temperature limit for overtemperature protection
Display of the temperature at the external and internal temperature sensor
If no external temperature sensor is connected (not enclosed, can be ordered separately), "0C" is dis-
played.
Input voltage
If the charger is operated via the mains voltage, the input voltage is always displayed as approx. 15 V/DC
(this is the voltage of the internal mains unit).
End Voltage
12.60V
IN Power Voltage
14.93V
Ext.Temp 0C
Int.Temp 25C
Safety timer
ON 200min
Capacity Cut-off
5000mAh
Temp. Cut-off
ON 60C(140F)