Instructions
36
• Connecttheproducttoawall-mountedmainssocket.Donotusepowerstrips,extensioncablesetc.
Due to the microwave’s high power consumption, they can be very easily overloaded via operation with
several devices.
• Do not connect an additional remote switching device, a timer or other devices to turn the product
automatically on.
• Never cover the appliance during use. Only move, transport or store the product when it has fully cooled
down.
• Removetheglassrotatingplateandtherollerringbeforemovingthemicrowaveoven.
• Two persons are required to transport, unpack and set up the product due to its great weight.
• Theappliancegeneratesheat and hot steam.Ensurethatthereis sufcient ventilationanddonot
cover the appliance during use. Keep the appliance well away from shelves, walls and people for safety
reasons.Riskofscalding!
• Keep the appliance’s openings free. Do not insert any sharp objects into the appliance. This may result
in an electrical shock!
• Do not touch the appliance with wet or damp hands. This may result in an electrical shock!
• Neverpouranyliquidsoverelectricaldevicesorplaceobjectslledwithliquidnexttotheproduct.If
liquidoranobjectdoesentertheinteriorofthedevice,powerdowntherespectivesocket(e.g.switch
off circuit breaker), and remove the mains plug from the mains socket. Discontinue use and take the
product to a specialist repair centre.
• Never use the product immediately after it has been brought from a cold room into a warm one. The
condensation generated could destroy the product. Allow the product to reach room temperature before
connecting it to an appliance. This may take several hours.
• Do not place any objects on the appliance.
• Do not leave the product unattended during use.
• Only use the accessories that come with the appliance.
• Do not fry any foods in the microwave. Hot oil can damage the product. This also poses a risk of burning!
• Do not use the cooking chamber to store paper products, cooking utensils, etc., when the product is not
in operation.
c) Connecting the mains cable
• Theonlypermissiblevoltagesourceisapropermainssocket(230V/AC,50Hz)ofthepublicsupply
network with an earthing contact.
• Before connecting the product to the mains, check that your localA/Cmainsvoltage matches the
specicationsonthenameplate.
• Do not let the mains cable hang over the edge of tables or other surfaces on which the product is
standing.Completelyunwindthemainscablebeforeuse.Amainscablethatisnotcompletelyunwound
can lead to overheating. Fire hazard!
• The mains socket must be located near to the device and be easily accessible.