Instructions

Parts List
# Description Qty
1 Handle grip 1
2 Handles 1
3 Cover plate 1
4 Locating pin 1
5 Positioning spring 1
6 Supporting shaft 1
7 Pin for frame 1
8 Supporting shaft 1
9 Connecting rod 2
10 Lifting arm assembly 1
11 C-clip Ø 16 mm 2
12 Cotter pin Ø 2 x 20 mm 1
13 Saddle 1
14 Saddle pin 1
15 C-clip Ø 10 mm 4
16 Right frame assembly 1
17 Spring washer M12 6
18 Nut M12 6
19 Carrying grip 1
20 Washer M12 2
21 Sleeve for front wheel 2
22 Front wheel 2
# Description Qty
23 Saddle base assembly 1
24 Pin for saddle base 1
25 C-clip Ø 13 mm 1
26 Shaft for front wheel 1
27 Pin for lifting arm 1
28 Rear caster assembly 2
29 Left frame assembly 1
30 Return spring 1
31 Oil plug 1
32 Power unit assembly 1
33 Steel ball bearing Ø 6 mm 1
34 Release valve assembly 1
35 Pump plunger assembly 1
36 U-bracket for plunger 1
37 Handle socket 1
38 Round wire snap ring Ø 1.4 x 26 mm 1
39 Pin for pump plunger 1
40 Pin for unit base 1
41 Round wire snap ring Ø 1.2 x 20 mm 1
42 Seal kit 1
43 Safety valve “DO NOT ADJUST” 1
Troubleshooting
Problem Cause Action
Trolley jack will not
lower completely
Air in hydraulic system
Transfer load to another trolley jack
Purge air from hydraulic system
Imprecise movement
when lifting
Air in hydraulic system Purge air from hydraulic system
Load lowers down
1 Contaminated oil
2 Air in hydraulic system
1 Replace oil
2 Purge air from hydraulic system
The jack does not
reach full height
1 Low oil level
2 Air in hydraulic system
1 Add oil
2 Purge air from hydraulic system
Weak lifting
1 Air in hydraulic system
2 Dirty oil
3 Release valve not
completely closed
1 Purge air in hydraulic system
2 Change oil
3 Turn valve clockwise to tighten
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represents the technical status at the time of printing.
Copyright 2019 by Conrad Electronic SE. *1900671_v1_0419_02_dh_m_en(1)
Jack will not lift load
1 Excessive weight
2 Release valve in open
position
3 Oil level is low
1 Decrease weight or change to a higher
capacity jack
2 Turn valve clockwise to tighten
3 Fill to recommended level
Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares that this product:
• Description: Floor jack
• Model no.: T820050
Is in accordance with the following directives, norms and/or regulations:
• Machinery directive 2006/42/EC
• EN 1494: 2000 +A1: 2008
Click on the following link to read the full text of the EU declaration of conformity:
www.conrad.com/downloads
Select a language by clicking on a ag symbol and enter the product order number in the search
box. You can then download the EU declaration of conformity in PDF format.
Disposal
At the end of its service life, dispose of the product according to the relevant statutory regulations.
You thus full your statutory obligations and contribute to the protection of the environment.
Technical Data
Load bearing capacity .......................... 2 t (2000 kg)
Lifting range .......................................... 135 - 340 mm
Hydraulic oil type .................................. SAE 10 or equivalent special purpose hydraulic oil
Oil capacity ........................................... 103 ml
Operating/storage temperature ............ -20 to +50 °C
Dimensions (W x H x D) ....................... 196 x 135 x 447 mm
Weight ..................................................8.7 kg (with pump piston handles)
43
Parts Diagram