User manual

27
• Occasionallycleanthesolderingtipofuxagentresidueusingthemoistenedsponge.Forthis,onlybrieywipe
the soldering tip on the sponge.
Do not press the soldering tip into the sponge. Also never hold the soldering tip against or into the sponge
for too long, since it would be damaged by this.
 Alwaysensurethatthespongeissufcientlymoist.Nevercleanthesolderingtiponadrysponge.
Mechanical damage to the soldering tip will destroy the protective layer there and strongly reduce service
life. Therefore, do not clean the soldering tip with any sharp-edged objects or a metal brush.
• Beforecompletingthesolderingwork,thesolderingtipmustbecleanedofuxagent(seeabove).Thenthesolder-
ingtipmustbetinned.Forthis,putsomesolderontothesolderingtip,sothataneventlmofsolderformsonthe
tip. This prevents corrosion of the soldering tip.
Then plug the soldering gun into the deposit stand. Then switch off the soldering station (switch position "O" = off).
The soldering gun needs about 10 - 15 minutes to cool off entirely. During this time, do not touch the solder-
ing tip or the deposit stand. Danger of burns!
 Beforestoringthesolderingstation,itmustbecooledoffentirely!Thereisadangerofreifthisisnot
observed!