User Manual

Baseus K01B Wireless Tri-Mode Keyboard

User Manual

Before using the product, thoroughly read this manual. Keep the manual for future reference.

1. Content

Keyboard×1

User manual×1

Warranty card×1

2.4G USB receiver×1

2. Specifications

Name: Baseus K01B Wireless Tri-Mode Keyboard

Model No.: K01B

Operating Voltage: 3V

Operating Current: 2mA

Compatible System: Windows, Apple OS, Linux, Harmony OS, Android

3. Connection Instructions

2.4G Connection Mode

1. Install two AAA batteries, and press the power button on the right upper corner, the keyboard will enter

the 2.4G connection mode.

2. Take out the USB receiver and connect it to the computer, and wait for the computer to install the driver,

then you can use the keyboard.

3. If step 1 and step 2 fail to pair, please press and hold "esc" and "+" at the same time to enter 2.4G forced

pairing, during when the LED flashes green, and repeat the step 2 above.

BT1 Connection Mode

Press the BT1 button on the keyboard and the indicator flashes slowly, entering the BT1 mode.

Press and hold the BT1 button for 3s and the indicator flashes quickly, entering the BT1 searching mode.

Turn on wireless on your computer, and select “Baseus K01B-BT3.0” to connect if your operating system is

Win 7 or earlier, or select “Baseus K01B-BT5.0” to connect if your operating system is Win 8 or above.

Function Description:

Note: The multifunction key is to test the built-in software, due to different codecs, other APPs may be

different.

4. Attention

Indicator flashes red, meaning the battery is low, please change the batteries.

When the keyboard shuts down itself or stops working, it means the battery is to low to maintain operation,

please change the batteries immediately.

Please remove the batteries if you decide to not use the keyboard for a long time.

Actual battery life may vary depending on your personal use habit or use environment.

Warning: Keep the product away from fire sources, and DO NOT attempt to personally

disassemble or modify the product, please contact customer service for help if you have any

FCC NOTE：

This device complies with Part 15 of the FCC Rules.Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and

PAGE 1
Baseus K01B Wireless Tri-Mode Keyboard User Manual Before using the product, thoroughly read this manual. Keep the manual for future reference. 1. Content Keyboard×1 User manual×1 Warranty card×1 2.4G USB receiver×1 2. Specifications Name: Baseus K01B Wireless Tri-Mode Keyboard Model No.: K01B Operating Voltage: 3V Operating Current: 2mA Compatible System: Windows, Apple OS, Linux, Harmony OS, Android 3. Connection Instructions 2.4G Connection Mode 1.
PAGE 2
(2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.