Product Manual

1. Product connection steps
2.1 boot
When the device is powered on for the first time, turn on the key to the starting position. At this time, the red and white light flashes quickly to enter bluetooth pairing.
2. Bluetooth connection
3. Turn on the Bluetooth function of the mobile phone, enter the pairing mode, and select Baseus Bowie U2 Pro
4. After the connection is successful, the indicator is off.
3Download the APP and bind the headphones
4. Turn it off
5. Switch the on key to the shutdown position, and the earphone enters the shutdown state.
Ii. Product function operation (wireframes, indicating corresponding buttons)
Music mode:
Play/Pause: Click your left or right ear (L or R)
Previous song: Press left ear for 1.5 seconds
Next: Press your right ear for 1.5 seconds
Activate the phone's voice assistant: Three clicks on the left or right ear (L or R)
Switching noise reduction mode: Double click left ear or right ear (L or R)
Note: Mode switching sequence is: Noise reduction on - >; Normal mode - > Transparent mode
Phone mode:
Answer/Hang up: Click the left or right ear (L or R).
Reject: Press left or right ear for 1.5 seconds (L or R)
Charging power indicator:
When the earphone is in the charging process, the battery indicator lights red; When fully charged, the power indicator lights white.
Restore factory Settings:
When the headset is on, turn off the bluetooth of the mobile phone and hold down the left ear touch button and the right ear touch button for 4 seconds at the same t
ime. The red light blinks three times, indicating success.
APP Usage and security:
1. Custom adjustment of gestures can be carried out in the APP.
2. EQ mode selection and custom adjustment can be carried out in APP.
3. Noise reduction mode can be selected in APP.
4. Low delay mode can be switched in the APP.