User's Manual

6
Add a Device
(Figure 31) Add a device after logging in using the mobile number. Select the product model and
manually add the device network (for iOS users, manually switch to the home Wi-Fi network).
Configuring a Network
Enter the network connection preparation state according to the steps shown in the figures (Figure 1,
Figure 2, and Figure 3).
Search for a device and add it to the network (Figure 4 and Figure 5).
Select the home network name and enter the password (Figure 6).
The device starts to configure the network (Figure 7 and Figure 8).
Tips: Before configuring the network, ensure that it is in the 2.4 GHz Wi-Fi channel. Temporarily, it
does not support 5 GHz Wi-Fi channel. Configure the network in an area with strong Wi-Fi signal
strength. It takes a while to enable the Wi-Fi hotspot. Please be patient.
Press the voice and Wi-Fi button on the back of the product to enable or disable voice prompts. Press
and hold for 3s to make the Wi-Fi chip pair with the network.
Unbinding and Sharing
Enter the settings, press Unbind to unbind the X3 from the app. (Figure 41)
On the home screen of the app, tap “Me” in the lower right corner (Figure 42). Tap “Share” on the list
and select the product category to share. Add the product to the sharing list (Figure 43) and share it
through email or registered mobile number (Figure 44).
Tips: When the product is powered on, press the water absorption button and self-cleaning button for
20s to reset the app.
Maintenance
(Figure 32)
Cleaning the main unit
1. Before cleaning, stop the X3
2. Wipe the product with water or a neutral detergent. Be sure to wring out the cleaning cloth before
cleaning, and do not let water get inside of the electrical components.
Cleaning the dirty water tank (Figure 33)
1. When the dirty water tank is full, the product automatically shuts down and generates prompts
through display or voice.
2. If there is stubborn dirt on the inner walls of the dirty water tank, clean it directly with a sponge or
other cleaning tool.
3. After cleaning, close the tank cover and install it back to the main unit until you hear a click.
Regularly clean the residual stains on the vacuum cover, roller and scraper of the roller brush to
maintain optimal operation.
Cleaning the dirty water tank (Figure 35)
Completely take out the top cover (including filter element assembly) from dirty water tank and rinse
off the dirt inside the tank with clean water.