Certifications 2

ManualsBrandsBASF Ultrafuse Manuals3D Printer FilamentsBASF Ultrafuse PLA-0002B075 PLA BLACK Filament PLA 2.85 mm 750 g Black

Page 1 of 7

www.innofil3d.com | info@innofil3d.com

MATERIAL SAFETY DATA SHEET

according to Regulation (EU) No. 1907/2006

Innofil3D PLA

1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY /

UNDERTAKING

Product information

Trade name : Innofil3D PLA

Chemical name : Polylactic Acid

Chemical family : Thermoplastic Polylactic Acid

Use : Monofilament for 3D-printing

Company : Innofil3D BV.

Eerste Bokslootweg 17

7821 AT Emmen

Telephone : +31 (0)591 69 2117

Telefax : +31 (0)591 69 3456

2. HAZARDS IDENTIFICATION

Classification according to Regulation (EG) No. 1272/2008 [CLP/GHS]:

This product is not classified as hazardous according to Regulation (EG) 1272/2008 as

amended.

Risk advice to man and the environment

No risk exists to the health of users if the product is handled and processed properly.

Potential health effects:

Eye contact : Contact with eyes may cause irritation.

Skin contact : Substance may cause slight skin irritation.

Ingestion : Ingestion may cause gastrointestinal irritation, nausea,

vomiting and diarrhea.

Inhalation : Inhalation of dust may cause shortness of breath, tightness

of the chest, a sore throat and cough.

Target organ effects : There were no target organ effects noted following ingestion

or dermal exposure in animal studies.

Sensitization : Did not cause sensitization on laboratory animals.

Summary of content (7 pages)

PAGE 1
MATERIAL SAFETY DATA SHEET according to Regulation (EU) No. 1907/2006 Innofil3D PLA 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY / UNDERTAKING Product information Trade name : Innofil3D PLA Chemical name : Polylactic Acid Chemical family : Thermoplastic Polylactic Acid Use : Monofilament for 3D-printing Company : Telephone Telefax : : Innofil3D BV. Eerste Bokslootweg 17 7821 AT Emmen +31 (0)591 69 2117 +31 (0)591 69 3456 2.
PAGE 2
Specific hazards : No information available. Flammability : Fine dust dispersed in air may ignite. 3. COMPOSITION / INFORMATION ON INGREDIENTS Chemical nature Chemical name : Polylactic resin CAS Number : 9051-89-2 Weight : >98% OSHA Exposure Limits : None ACGIH Exposure Limits : None All ingredients in quantities > 1% (0.1% for carcinogens) that are potentially hazardous per OSHA definitions. Other standards : This material can generate Particulates Not Otherwise Classifiable (PNOC).
PAGE 3
5. FIRE-FIGHTING MEASURES Flammable properties : Autoignition temperature: 388 °C. Suitable extinguishing media : Foam. Water. Carbon dioxide (CO2). Dry chemical. Alcohol resistant foams are preferred if available. General-purpose synthetic foams (including AFFF) or protein foams may function, but much less effectively. Hazardous decomposition products Burning produces obnoxious and toxic fumes Aldehydes Carbon monoxide (CO) carbon dioxide (CO2).
PAGE 4
8. EXPOSURE CONTROLS / PERSONAL PROTECTION Engineering measures : Where reasonably practicable this should be achieved by the use of local exhaust ventilation and good general extraction. Provide appropriate exhaust ventilation at places where dust is formed. Control parameters : None. Personal protective equipment Eye protection : Safety glasses with side-shields. Goggles. Skin and body protection : Impervious clothing. Respiratory protection : Respirator must be worn if exposed to dust.
PAGE 5
10. STABILITY AND REACTIVITY Stability : Stable under recommended storage conditions. Conditions to avoid : Temperatures above 230°C (446F). Materials to avoid : Oxidizing agents. Strong bases. Decomposition : Burning produces obnoxious and toxic fumes. Aldehydes. Carbon monoxide (CO). Carbon dioxide (CO2). Polymerization : Not applicable. 11. TOXICOLOGICAL INFORMATION Principle routes of exposure : Eye contact. Skin contact. Inhalation. Ingestion.
PAGE 6
12. ECOLOGICAL INFORMATION Mobility : No data available Bioaccumulation : Does not bioaccumulate. Inherently biodegradable. Ecotoxicity effects : EC50/72h/algae > 1100 mg/L 13. DISPOSAL CONSIDERATIONS Waste from residues / unused products: In accordance with local and national regulations. Do not contaminate ponds, waterways or ditches with chemical or used container. Contaminated packaging: Empty remaining contents. Do not re-use empty containers.
PAGE 7
OTHER INVENTORIES. Canada DSL Inventory List : Listed. REACH/EU EINIECS List : Components are in compliance with and/or are listed. Japan (ECL) : Listed. Australia (AICS) : Listed. Korean chemical inventory : Listed. Phillipines (PICCS) inventory : Not listed. China inventory of existing chemical substances list Listed : 16. OTHER INFORMATION -The information in this Material Safety Data Sheet (MSDS) is based on current knowledge and experience.