Certifications 2
Table Of Contents
- 1. Identification
- 2. Hazards Identification
- 3. Composition/Information on Ingredients
- 4. First-Aid Measures
- 5. Fire-Fighting Measures
- 6. Accidental Release Measures
- 7. Handling and Storage
- 8. Exposure Controls/Personal Protection
- 9. Physical and Chemical Properties
- 10. Stability and Reactivity
- 11. Toxicological Information
- 12. Ecological Information
- 13. Disposal Considerations
- 14. Transport Information
- 15. Regulatory Information
- 16. Other Information
Page: 2/11
BASF Safety data sheet according to UN GHS 4th rev.
Date / Revised: 14.11.2019 Version: 2.0
Product: Ultrafuse PLA PRO1
(ID no. 971648/SDS_GEN_00/EN)
Date of print 17.11.2019
The product does not require a hazard warning label in accordance with GHS criteria.
Other hazards
According to UN GHS criteria
No specific dangers known, if the regulations/notes for storage and handling are considered.
3. Composition/Information on Ingredients
Substances
Not applicable
Mixtures
Chemical nature
Polymer
Hazardous ingredients (GHS)
According to UN GHS criteria
No particular hazards known.
4. First-Aid Measures
Description of first aid measures
Remove contaminated clothing.
If inhaled:
Remove the affected individual into fresh air and keep the person calm. Assist in breathing if
necessary. If symptoms persist, seek medical advice.
On skin contact:
Wash thoroughly with soap and water. Burns caused by molten material require hospital treatment. If
irritation develops, seek medical attention.
On contact with eyes:
In case of contact with the eyes, rinse immediately for at least 15 minutes with plenty of water. If
irritation develops, seek medical attention.
On ingestion:
Keep patient calm, remove to fresh air. Immediate medical attention required.