Certifications 2

Page: 3/11
BASF Safety data sheet according to UN GHS 4th rev.
Date / Revised: 14.11.2019 Version: 2.0
Product: Ultrafuse PLA PRO1
(ID no. 971648/SDS_GEN_00/EN)
Date of print 17.11.2019
Most important symptoms and effects, both acute and delayed
Symptoms: (Further) symptoms and / or effects are not known so far
Hazards: No hazard is expected under intended use and appropriate handling.
Indication of any immediate medical attention and special treatment needed
Treatment: Treat according to symptoms (decontamination, vital functions), no known specific
antidote.
5. Fire-Fighting Measures
Extinguishing media
Suitable extinguishing media:
water spray, foam, dry powder
Special hazards arising from the substance or mixture
carbon oxides
The substances/groups of substances mentioned can be released in case of fire.
Advice for fire-fighters
Special protective equipment:
Wear a self-contained breathing apparatus.
Further information:
Dispose of fire debris and contaminated extinguishing water in accordance with official regulations.
6. Accidental Release Measures
Avoid dispersal of dust in the air (i.e., clearing dust surfaces with compressed air). Avoid the
formation and build-up of dust - danger of dust explosion. Dust in sufficient concentration can result
in an explosive mixture in air. Handle to minimize dusting and eliminate open flame and other
sources of ignition.
Personal precautions, protective equipment and emergency procedures
No special precautions necessary.
Environmental precautions
Do not discharge into drains/surface waters/groundwater.
Methods and material for containment and cleaning up
For small amounts: Sweep/shovel up.
For large amounts: Sweep/shovel up. Vacuum up spilled product.
Reclaim for processing if possible. Ensure adequate ventilation. Avoid raising dust.