Certifications 2

Page: 5/11
BASF Safety data sheet according to UN GHS 4th rev.
Date / Revised: 14.11.2019 Version: 2.0
Product: Ultrafuse PLA PRO1
(ID no. 971648/SDS_GEN_00/EN)
Date of print 17.11.2019
9. Physical and Chemical Properties
Information on basic physical and chemical properties
Form: filament
Colour: various, depending on the colourant
Odour: odourless
Odour threshold:
not applicable
pH value:
not applicable
melting range:
not determined
Boiling point:
not applicable
Flash point:
not applicable
Evaporation rate:
The product is a non-volatile solid.
Flammability: not flammable
Lower explosion limit:
For solids not relevant for
classification and labelling.
Upper explosion limit:
For solids not relevant for
classification and labelling.
Ignition temperature:
not applicable
Vapour pressure:
not applicable
Density:
(25 °C)
not determined
Relative vapour density (air):
not applicable
Solubility in water: insoluble
Partitioning coefficient n-octanol/water (log Kow):
not applicable
Self ignition: not self-igniting
Thermal decomposition: No decomposition if stored and handled as prescribed/indicated.
Prolonged thermal loading can result in products of degradation being
given off.
Viscosity, dynamic:
not applicable
Viscosity, kinematic:
not applicable, the product is a solid
Explosion hazard: not explosive