Certifications 2
Table Of Contents
- 1. Identification
- 2. Hazards Identification
- 3. Composition/Information on Ingredients
- 4. First-Aid Measures
- 5. Fire-Fighting Measures
- 6. Accidental Release Measures
- 7. Handling and Storage
- 8. Exposure Controls/Personal Protection
- 9. Physical and Chemical Properties
- 10. Stability and Reactivity
- 11. Toxicological Information
- 12. Ecological Information
- 13. Disposal Considerations
- 14. Transport Information
- 15. Regulatory Information
- 16. Other Information
Page: 6/11
BASF Safety data sheet according to UN GHS 4th rev.
Date / Revised: 14.11.2019 Version: 2.0
Product: Ultrafuse PLA PRO1
(ID no. 971648/SDS_GEN_00/EN)
Date of print 17.11.2019
Fire promoting properties: not fire-propagating
Other information
Self heating ability: It is not a substance capable of
spontaneous heating.
Other Information:
If necessary, information on other physical and chemical parameters is indicated in this section.
10. Stability and Reactivity
Reactivity
No hazardous reactions if stored and handled as prescribed/indicated.
Corrosion to metals:
No corrosive effect on metal.
Chemical stability
The product is stable if stored and handled as prescribed/indicated.
Possibility of hazardous reactions
No hazardous reactions if stored and handled as prescribed/indicated.
The product is chemically stable.
Conditions to avoid
Temperature: > 300 °C
Prolonged exposure to elevated temperatures may result in exothermic decomposition accompanied
by a pressure build-up in sealed containers. Avoid all sources of ignition: heat, sparks, open flame.
Incompatible materials
Substances to avoid:
oxidizing agents
Hazardous decomposition products
Hazardous decomposition products:
monomers, gases/vapours, oxides, hydrocarbons
11. Toxicological Information
Information on toxicological effects
Acute toxicity
Assessment of acute toxicity:
Contact with molten product may cause thermal burns.