Certifications 2

ManualsBrandsBASF Ultrafuse Manuals3D Printer FilamentsBASF Ultrafuse PR1-7502a450 Filament Tough PLA 1.75 mm 4.500 g Black Pro1

Table Of Contents

Safety data sheet

Page: 1/11

BASF Safety data sheet according to UN GHS 4th rev.

Date / Revised: 14.11.2019 Version: 2.0

Product: Ultrafuse PLA PRO1

(ID no. 971648/SDS_GEN_00/EN)

Date of print 17.11.2019

1. Identification

Product identifier

Ultrafuse PLA PRO1

Recommended use: 3D Printing, for industrial use only

Details of the supplier of the safety data sheet

Company:

BASF 3D Printing Solutions B.V.

Eerste Bokslootweg 17

7821 AT Emmen, Netherlands

Telephone: + 31 591 820 389

E-mail address: sales@basf-3dps.com

Emergency telephone number

National Poisoning Information Centre: +31 30 – 2748888

Information only for professionals in case of acute intoxication

International emergency number:

Telephone: +49 180 2273-112

2. Hazards Identification

Classification of the substance or mixture

According to UN GHS criteria

No need for classification according to GHS criteria for this product.

Label elements

Globally Harmonized System (GHS)

Summary of content (11 pages)

PAGE 1
Safety data sheet Page: 1/11 BASF Safety data sheet according to UN GHS 4th rev. Date / Revised: 14.11.2019 Product: Ultrafuse PLA PRO1 Version: 2.0 (ID no. 971648/SDS_GEN_00/EN) Date of print 17.11.2019 1. Identification Product identifier Ultrafuse PLA PRO1 Recommended use: 3D Printing, for industrial use only Details of the supplier of the safety data sheet Company: BASF 3D Printing Solutions B.V.
PAGE 2
Page: 2/11 BASF Safety data sheet according to UN GHS 4th rev. Date / Revised: 14.11.2019 Product: Ultrafuse PLA PRO1 Version: 2.0 (ID no. 971648/SDS_GEN_00/EN) Date of print 17.11.2019 The product does not require a hazard warning label in accordance with GHS criteria. Other hazards According to UN GHS criteria No specific dangers known, if the regulations/notes for storage and handling are considered. 3.
PAGE 3
Page: 3/11 BASF Safety data sheet according to UN GHS 4th rev. Date / Revised: 14.11.2019 Product: Ultrafuse PLA PRO1 Version: 2.0 (ID no. 971648/SDS_GEN_00/EN) Date of print 17.11.2019 Most important symptoms and effects, both acute and delayed Symptoms: (Further) symptoms and / or effects are not known so far Hazards: No hazard is expected under intended use and appropriate handling.
PAGE 4
Page: 4/11 BASF Safety data sheet according to UN GHS 4th rev. Date / Revised: 14.11.2019 Product: Ultrafuse PLA PRO1 Version: 2.0 (ID no. 971648/SDS_GEN_00/EN) Date of print 17.11.2019 7. Handling and Storage Precautions for safe handling Avoid inhalation of dusts/mists/vapours. Ensure adequate ventilation. Provide suitable exhaust ventilation at the drying process and in the area surrounding the melt outlet of processing machines. Keep away from sources of ignition - No smoking.
PAGE 5
Page: 5/11 BASF Safety data sheet according to UN GHS 4th rev. Date / Revised: 14.11.2019 Product: Ultrafuse PLA PRO1 Version: 2.0 (ID no. 971648/SDS_GEN_00/EN) Date of print 17.11.2019 9.
PAGE 6
Page: 6/11 BASF Safety data sheet according to UN GHS 4th rev. Date / Revised: 14.11.2019 Product: Ultrafuse PLA PRO1 Version: 2.0 (ID no. 971648/SDS_GEN_00/EN) Date of print 17.11.2019 Fire promoting properties: not fire-propagating Other information Self heating ability: It is not a substance capable of spontaneous heating. Other Information: If necessary, information on other physical and chemical parameters is indicated in this section. 10.
PAGE 7
Page: 7/11 BASF Safety data sheet according to UN GHS 4th rev. Date / Revised: 14.11.2019 Product: Ultrafuse PLA PRO1 Version: 2.0 (ID no. 971648/SDS_GEN_00/EN) Date of print 17.11.2019 (by inhalation):The inhalation of dusts represents a potential acute hazard. (dermal):No applicable information available. Irritation Assessment of irritating effects: May cause slight irritation to the skin. May cause slight irritation to the eyes.
PAGE 8
Page: 8/11 BASF Safety data sheet according to UN GHS 4th rev. Date / Revised: 14.11.2019 Product: Ultrafuse PLA PRO1 Version: 2.0 (ID no. 971648/SDS_GEN_00/EN) Date of print 17.11.2019 Assessment of STOT single: Based on available Data, the classification criteria are not met.
PAGE 9
Page: 9/11 BASF Safety data sheet according to UN GHS 4th rev. Date / Revised: 14.11.2019 Product: Ultrafuse PLA PRO1 Version: 2.0 (ID no. 971648/SDS_GEN_00/EN) Date of print 17.11.2019 The product does not fulfill the criteria for PBT (Persistent/bioaccumulative/toxic) and vPvB (very persistent/very bioaccumulative). Additional information Add. remarks environm. fate & pathway: Due to the consistency of the product, dispersion into the environment is impossible.
PAGE 10
Page: 10/11 BASF Safety data sheet according to UN GHS 4th rev. Date / Revised: 14.11.2019 Product: Ultrafuse PLA PRO1 Version: 2.0 (ID no. 971648/SDS_GEN_00/EN) Date of print 17.11.
PAGE 11
Page: 11/11 BASF Safety data sheet according to UN GHS 4th rev. Date / Revised: 14.11.2019 Product: Ultrafuse PLA PRO1 Version: 2.0 (ID no. 971648/SDS_GEN_00/EN) Date of print 17.11.2019 Regulation: Shipment approved: Pollution name: Pollution category: Ship Type: Not evaluated Not evaluated Not evaluated Not evaluated Not evaluated 15.