Information

Phone: [phone]www.forward-am.com
Example Applications
Functional flexible parts
Wear and tear application
Printing Guidelines
Benefits at a Glance
Perfect for fast printing
High abrasion resistance
Easy to handle
Good resistance to oils and
common industrially used
chemicals
Printable on direct drive and
bowden style printers
Nozzle Temperature 210 –230 °C
40 °C
≥ 0.4 mm
Glass
15 –40 mm / sec
Nozzle Diameter
Bed Temperature
Bed Modification
Print Speed
The product data is provided in good faith and represents typical properties
based on our current knowledge and experience; these data are not to be
construed as specifi cation limits or minimum values. Product properties
may be changed without notice. This document does not create any liability,
warranty or guarantee of product performance. It is the buyer’s responsibility
to determine the suitability of Ultrafuse® products for the intended application.
Ultrafuse
®
TPU 95A
Flexible Filament based on BASF Elastollan
®
Ultrafuse
®
TPU 95A has been developed specificially to enable fast and easy printing with a flexible filament for Fused Fila-
ment Fabrication. By building on the legacy of BASF‘s decades of experience in flexible materials, this material is based
on the established thermoplastic polyurethane Elastollan
®
, standing for maximum reliability, consistent product quality and
cost efficiency. With its outstanding abrasion resistance, Ultrafuse
®
TPU 95A presents an excellent choice for wear and tear
applications. Parts printed with this material set themselves apart by high elongation at break, great layer adhesion and a
good resistance to oils as well as industrially used chemicals.
Phone: [phone]
Material Properties
92
64 mm3
44.2 MPa (XY),
12.2 MPa (ZX)
661 % (XY),
192 % (ZX)
90 kN/m (XY), 8 kN/m
(XZ), 14 kN/m (ZX)
38 %
Stress at Break:
Elongation at Break:
Tear Strength:
Shore A Hardness
Abrasion Resistance
Compression set
at 23°C, 72 h: