User`s manual

Configuring the Camera

4-20 BASLER A202

DRAFT

4.2.4.16 Mirror Image

Purpose: To enable or disable the mirror image feature. See Section 3.9 for an explanation of mirror

image.

Type: This is a read or write command.

Read Command: Cmd-ID R/W-Flag Data Length Data

0xC1 1 1 -

Response: Cmd-ID R/W-Flag Data Length Data

0xC1 0 1 1 Byte

Write Command: Cmd-ID R/W-Flag Data Length Data

0xC1 0 1 1 Byte

Response: None

Data Format: Byte 1 An ID that specifies the mirror image status

(see the table below).

ID Mirror Image

0x00 Mirror image not enabled

0x01 Mirror image enabled