User`s manual

AW00118501000 Features
Basler racer Camera Link 105
// Read the Firmware Version parameter
Pylon::String_t firmwareVersion = Camera.DeviceFirmwareVersion.GetValue();
// Read the Device ID parameter
Pylon::String_t deviceID = Camera.DeviceID.GetValue();
// Write and read the Device User ID
Camera.DeviceUserID = "custom name";
Pylon::String_t deviceUserID = Camera.DeviceUserID.GetValue();
// Read the Sensor Width parameter
int64_t sensorWidth = Camera.SensorWidth.GetValue();
// Read the Sensor Height parameter
int64_t sensorHeight = Camera.SensorHeight.GetValue();
// Read the Max Width parameter
int64_t maxWidth = Camera.WidthMax.GetValue();
// Read the Max Height parameter
int64_t maxHeight = Camera.HeightMax.GetValue();
// Read the Temperature Abs parameter
camera.TemperatureSelector.SetValue(TemperatureSelector_Sensorboard);
double temperature = camera.TemperatureAbs.GetValue();
You can also use the Basler pylon Viewer application to easily read the parameters and to read or
write the Device User ID.
You can use the Basler pylon IP Configuration tool to read or write the Device User ID.
For more information about the pylon Viewer, see Section 3.1 on page 15.
For detailed information about using the pylon API and the pylon IP Configuration Tool, refer to the
Basler pylon Programmer’s Guide and API Reference.