User`s manual

V 1 P R O F E S S I O N A L 5 . 7
26
The last recording option is Record a lesson then burn it to CD . In order to use this
option, you must be using the XP or Vista operating system with a CD-R (recordable
CD) drive. You must also enable “desktop CD recording.” Do this by opening the
“My Computer” icon on your desktop or Windows Start menu. Locate your CD drive
icon, right-click on it, and select “Properties.” You should see a window like this one:
Click on the Recording tab, and then check the box for the Enable CD recording on
this drive option. Click Ok .
The Record a lesson then burn it to CD recording mode works much like recording
an Internet lesson using the broadband (higher quality) settings. You must perform
most of the same setup requirements, such as configuring your microphone and the
Windows Media Encoder (please consult the Internet Academies chapter for more
information). However, it is not necessary to be an authenticated Academy instructor
or to have a student selected with a valid email address.
The V1’s Time Indicator reflects the amount of hard drive space
you have available for new recordings (expressed in minutes and
seconds). The time decreases as recording progresses. In triggered recording modes,
the Time Indicator is used as a “time out” counter. If a trigger is not detected in the
allotted time, recording is automatically cancelled.
Check the Remember selection box if you want the V1 to remember which recording
method you use so that it will be automatically selected when you next use the record
button. It is recommended that you leave the box unchecked if you often click Begin
without being aware of the type of recording that actually is selected.
Instead of clicking Begin , you may also double-click the desired recording method.