User`s manual

V 1 P R O F E S S I O N A L 5 . 7
49
Boxes
The box tools share a single button. To switch between these tools, hold down the
box tool button that is currently displayed.
Rectangle : draws a shape with four sides and four right angles. Click at one
corner, and then draw to the opposite corner.
Box : draws a perfect square. Click at the center of the square, and then draw
“outward” in any direction.
Grid : draws a grid—a series of overlapping horizontal and vertical lines. The
default size of the grid squares will vary with the current line width setting.
The thicker the lines, the bigger the grid squares.
Once a grid has been drawn, you will see that it has three handles, or white squares,
that you can click and drag with the mouse. The handle at the top-left of the grid
allows you to move the entire grid. The handle at the bottom-right of the grid allows
you to resize it. The handle in the interior of the grid, near the bottom of the first
square, allows you to adjust the grid spacing. The V1 will remember your grid spacing
for subsequent grids.
Circles
The circle tools share a single button. To switch between these tools, hold down the
circle tool button that is currently displayed.
Circle : draws a perfect circle. Click at the center of the circle, and then draw
“outward” in any direction.
Oval : draws an ellipse. Click at one corner, and then draw to the opposite
corner of the rectangle that surrounds the oval.
Clock : draws a clock circle with “hour” ticks. Click at the center of the clock,
and then draw “outward” in any direction.