User`s manual

V 1 P R O F E S S I O N A L 5 . 7
85
Full-screen mode
By default, this option is enabled, and forces your desktop resolution to 800x600
(1280x768 for the Widescreen version). In this mode, the V1 occupies your entire
display. Use this mode on “dedicated” analysis machines. You may not want to use
this mode on laptop PCs which are unable to properly switch to this display mode (you
may see a large black border around the V1 window).
The V1 will not operate in Full-screen mode if your system is set to use anything but
the Normal (also called “small”) font size on your Windows
®
Display Properties
control panel. Measured in dots per inch (DPI), the normal font size is 96 DPI. At
120 DPI (125% of normal size), the font size setting is sometimes referred to as “large
fonts.” International versions of Windows
®
may have default font sizes other than 96
DPI. In this case, Full-screen mode will be overridden.
The V1’s normal window size is 800x600 or 1280x768 pixels, but changes with your
system’s font size setting. For example, the V1’s window size increases proportionally
to 1000x750 when using large fonts (125% of normal font size). In this case, therefore,
a desktop resolution of at least 1024x768 pixels is required in order to view the entire
V1 window.
In certain circumstances and locales, the V1 may incorrectly compensate for the system
font size, causing windows to be sized incorrectly. To override this behavior, and force
an 800x600 or 1280x768 size window, remove the check from the adjust display
sizes according to system font height box.
When using the V1 Widescreen version, the full-screen resolution is 1280x768.
Second-Monitor Tool-less Display
Check Use second monitor for tool-less video display if you have a system with two
monitors and you’d like to have the V1’s video window displayed on your second
monitor without the tools (the V1’s buttons). This feature has several requirements as
follows:
1. Your operating system (OS) must be Windows XP or Vista
®
.